Skip to main content

Dinky Toys: history, identification and values

Dinky Toys were diecast models made by Meccano Ltd of Liverpool from 1934 until the Binns Road factory closed in 1979. Most surviving examples are playworn and modestly priced. The valuable ones are sound pre-war models, and post-war models in fine original condition with the correct box.

A short history

Meccano Ltd, the company founded by Frank Hornby, already made Meccano construction sets and Hornby trains. In the early 1930s it began selling small cast figures and vehicles as accessories for its O gauge railways, under the name Modelled Miniatures. In 1934 the range was renamed Dinky Toys and quickly grew into a product in its own right: cars, vans, lorries, buses, aircraft and ships.

Production was interrupted by the Second World War and resumed afterwards, at first using pre-war castings. In 1947 the larger Dinky Supertoys appeared, a range of substantial lorries and commercial vehicles. The 1950s were the high point, with a huge range sold in the familiar yellow boxes.

From 1956 Dinky faced Corgi, whose models had windows, and responded with glazing, suspension and opening parts. Meccano was taken over by Lines Bros, the Tri-ang group, in 1964, and passed to Airfix in the early 1970s. The Binns Road factory closed in 1979. Dinky Toys were also made in France, and French Dinky is collected as a field of its own. Later models sold under the name by other companies are a separate matter.

How to date a model

Turn the model over first. The baseplate normally reads "Dinky Toys" and "Meccano Ltd" with "Made in England", and often names the vehicle. Many post-war models also carry a model number. Numbers were reorganised in the mid 1950s, when the older numbers with letter suffixes gave way to three-digit numbers, so the same casting can exist under two numbers.

The features below give a rough period. Changes were gradual and old parts were used up, so treat them as a guide and not as proof.

PeriodTypical features
1934 to the early 1940sSmooth wheel hubs, tyres often white, simple castings without windows, sold to shops in trade boxes of several models. Many suffer from metal fatigue.
Late 1940s to early 1950sRidged hubs, black tyres, many reissued pre-war castings, still mostly sold from trade boxes. Supertoys in their own boxes.
1950sIndividual yellow boxes, later with a picture of the model. Two-tone paint schemes on cars. The change to three-digit numbers.
Late 1950s and 1960sWindow glazing, suspension, interiors, shiny spun metal hubs, opening doors and bonnets. Film and television models.
1970sFast-rolling Speedwheels, plastic parts replacing metal, bubble packs and window boxes, simpler finishing.

A specialist reference book listing each model's numbers, colours and years is the most useful first purchase.

Metal fatigue

Dinky Toys were cast in a zinc alloy usually called mazak. When the alloy was contaminated with impurities, it slowly became unstable. The casting swells, distorts, develops fine cracks and eventually crumbles. Collectors call this metal fatigue or zinc pest.

It mainly affects pre-war models and a few from just after the war. Signs to look for are hairline cracks, bulging or sagging panels, a roof or chassis that no longer sits straight, and wheels splayed because the casting has grown. There is no cure. A fatigued model is worth much less than a sound one. Store affected models somewhere stable and dry and handle them as little as you can.

Repaints and restoration

Restoration is common and no problem when declared. It becomes one when a restored model is sold as original, or a common model is repainted in a rare colour.

  • Paint. Factory paint is thin and shows the fine detail of the casting. Repaints are often thicker, fill the detail, and sit over old chips. Look in the wheel arches and under the base for traces of another colour.
  • Rivets and axles. To repaint a model properly it has to be taken apart. Drilled or reshaped rivets, fresh bright axle ends and new crimping suggest it has been opened.
  • Tyres and parts. New tyres are soft, black and unmarked. Original tyres harden, flatten or perish. Replacement tyres are widely accepted, but replaced drivers, tinplate tilts, hooks and loads should be mentioned.
  • Decals. Reproduction transfers are usually brighter and cleaner than the paint around them.

Reproduction boxes

Reproduction Dinky boxes are sold openly, and not all are marked. Old card is slightly off-white on the inside, with soft, worn folds and often a faint musty smell. Reproductions tend to be bright white inside, sharply creased, glossy, and printed with colours that are a little too strong or slightly blurred.

Tip: on many yellow boxes a colour spot on the end flap shows the colour of the model inside. If the spot and the model disagree, the two did not start life together.

What collectors pay for

Condition and the box come first, then the scarcity of the particular version.

  • Pre-war models that are free of fatigue, especially the delivery vans in advertising liveries.
  • Supertoys and commercial vehicles, notably the big lorries and vans in company liveries, boxed and with good decals.
  • Scarce colours and late or early versions of long-running models.
  • Gift sets and film and television models that are complete with their packaging and accessories.

In broad terms, unboxed playworn cars sell for a few pounds and upwards. Good boxed post-war models are commonly in the tens of pounds, with scarcer ones in the low hundreds. The best pre-war pieces and rare liveries in top condition can reach four figures at specialist sales. Check recent sold prices for the same model, colour and condition.

Next steps