Breweriana and advertising collectables
Breweriana is anything made to advertise beer, breweries and pubs. Together with enamel signs, tins and old packaging it makes up advertising collecting, a field where the objects were given away or thrown away and where reproductions are the main risk.
What advertising collectors look for
Across the whole field, the same qualities decide interest and price:
- Strong graphics. A bold picture beats plain lettering. Signs and tins with a figure, an animal or a product illustration always outsell text-only versions.
- A known brand, or a lost local one. Famous names have wide appeal. Small breweries and local firms that vanished long ago have fewer collectors, but keen ones.
- Condition. Colour and gloss matter most. Honest wear is accepted on old signs, heavy rust and repainting much less so.
Beer mats
Collecting beer mats is called tegestology. Printed pulp-board mats came into use in British pubs between the wars and became universal after 1945. Breweries have issued them in thousands of designs since, which makes mats a collecting hobby with almost no entry cost.
Most mats are worth pennies. Collectors pay more for early mats, for mats from small breweries that closed long ago, and for scarce short-run issues. Condition means clean, flat, unstained and not written on. Many collectors specialise by brewery, region or period. Store mats flat in sleeves or boxes, dry and out of the light, because pulp board stains and warps easily.
Pub jugs, ashtrays and bar pieces
Whisky distillers and brewers supplied pubs with ceramic water jugs carrying their names. They were made by well-known potteries, including Wade and Royal Doulton, which adds interest for ceramics collectors. Check the spout, rim and handle for chips, and the transfer printing for wear.
Alongside jugs you will find ashtrays, match strikers, bar figures, pump clips, bar towels, trays, mirrors and branded glasses. Advertising figures made for the back of the bar are among the most sought-after pieces. The Guinness figures and wares produced by Carlton Ware are a well-known example, and they have been copied so widely that any example needs careful checking.
Enamel signs
Enamel signs were the outdoor advertising of the late nineteenth and early twentieth centuries, fixed to shop walls, station platforms and garages. They are made of sheet iron or steel coated with vitreous enamel, which is powdered glass fused to the metal in a furnace. Each colour was applied and fired separately. The result was weatherproof and almost unfadeable, which is why so many have survived outdoors.
Tobacco, cocoa, soap, polish, tea, motor oil and petrol brands were the big users. Pictorial signs and those in good condition with little chipping are the most valuable. Tobacco signs are collected as historical objects, like cigarette cards.
Telling an old sign from a new one
Reproduction signs are made in huge numbers. Most are sold honestly as decoration, but they turn up later described as old. Check these points.
- Weight and thickness. Old signs are on heavy-gauge metal and feel substantial. Many reproductions are thin, light tinplate with a printed surface, not enamel at all.
- Layered colour. On genuine enamel each colour is a separate layer of glass. Run a finger across the lettering and you can often feel a step. At a chip you can see the layers in section.
- How it has chipped. Real enamel chips like glass, in sharp-edged craters, typically around the fixing holes and edges, with rust spreading from the exposed metal. Fake ageing tends to be evenly spread, sanded or painted on, sometimes with rust-coloured paint.
- Printing. Look with a magnifier. A dot pattern means modern printing. Enamel colours are solid.
- The back and the holes. Old signs usually have enamel on the back too, and fixing holes showing genuine wear from screws and decades of weather.
- Size. Reproductions are often smaller than the original. If a famous design is offered in a handy small size, find out what size the original was.
- Colour and gloss. Old enamel has depth, like glass. A flat or slightly plastic-looking surface is a warning.
Restoration is the other thing to ask about. Chips on valuable signs are often filled and repainted. A restored sign is worth less than an untouched one in similar apparent condition, and an ultraviolet torch often shows the repaint. See spotting fakes and reproductions for the wider method.
Tins and packaging
Printed tins were made for biscuits, toffee, tea, cocoa, tobacco and mustard. Biscuit makers, Huntley & Palmers the best known among them, produced novelty tins shaped like books, vehicles and buildings, and those are the most valuable. Ordinary rectangular tins and the many coronation and jubilee tins are common and cheap.
For tins, condition means bright colour with little scratching, no rust, a lid that fits and a working hinge. Never scrub a tin or use metal polish on the printing: wipe gently with a barely damp cloth and dry at once.
Values
Most breweriana is inexpensive. Beer mats, labels, modern bar towels, ashtrays and common pub jugs sell for pennies to a few pounds. Good early jugs, bar figures and rare bottles reach the tens of pounds and beyond. Genuine enamel signs start in the tens of pounds for small, plain or damaged examples and rise into the hundreds, and sometimes the thousands, for large pictorial signs in fine condition. Check sold prices, and remember that a reproduction is worth only its price as decoration.
Related guides
- Ephemera: labels, tickets and other printed paper.
- Railwayana: station signs and the same reproduction problems.
- Badges and pins: advertising and brand badges.
- Spotting fakes and reproductions: the general rules.
- Buying at auction: where the better signs are sold.