Vintage watches for beginners
With a vintage watch you are buying condition and originality first and the name on the dial second. Choose an honest, unmolested example from a seller who will answer questions and take it back, and budget for a service unless there is a recent receipt.
What "vintage" means
There is no fixed definition. Collectors and dealers generally use "vintage" for watches roughly 25 to 30 years old or more, and "antique" for anything around a century old. Watches from the last couple of decades are usually just called pre-owned or second-hand, and you will also see "neo-vintage" used loosely for the 1980s and 1990s. The label matters less than the facts: when the watch was made, what it is and what state it is in.
Why originality matters so much
A watch can be serviced many times, but it is only original once. Collectors pay most for a watch that still has the dial, hands, crown, case and movement it left the factory with, even if those parts show their age. A worn but untouched dial is nearly always worth more than a freshly repainted one.
Redials and how to recognise them
A redial, or refinished dial, is one that has been stripped and reprinted. It was a normal part of servicing for decades, so plenty of otherwise good watches have one. It is not a fake, but it should be described and priced accordingly. Signs to look for under a loupe:
- Lettering that is thick, uneven, slightly crooked or in the wrong typeface compared with known original examples.
- Minute tracks that do not line up with the hour markers, or that wander near the edge.
- Print that runs over the edges of sub-dials or date windows.
- A dial in perfect condition inside a case that is heavily worn.
- Missing or misplaced small print at the bottom of the dial, such as the country of origin.
Replaced parts
Parts wear out and get changed. Some replacements barely affect value and others matter a great deal.
| Part | What to know |
|---|---|
| Crystal | Acrylic crystals scratch and are routinely replaced. Rarely a concern, though a correct style is preferred. |
| Crown | Often replaced at service. A signed crown of the correct type is a plus. |
| Hands | Should match the dial in style and in the colour of the luminous material. Mismatched ageing suggests a later swap. |
| Dial | The most important single part for value. Replacement "service" dials and redials both reduce it. |
| Case | Look for sharp edges and clear case-back engravings. Heavy polishing softens the shape for good. |
| Movement | Should be the correct calibre for the model, clean and free of rust. Non-original movement parts are a watchmaker's question. |
| Bracelet or strap | Leather straps are consumables. An original metal bracelet can add real value. |
A watch built up from parts of several different watches is known as a "franken" watch. See how to spot a fake watch for how these are caught.
Luminous dials
Glowing paint on the hands and markers has changed over time. Many watches made up to around the 1960s used radium-based paint, which is radioactive. It was followed by tritium and later by modern non-radioactive materials. A radium dial inside a closed watch is generally regarded as low risk to wear, but the paint becomes fragile with age, so do not open such a watch or scrape at the dial yourself. Leave it to a watchmaker who is set up to handle it.
Service history
Ask when the watch was last serviced and whether there is a receipt. "Running well" and "serviced" are not the same thing: a watch can run on dried-out oil for a while and wear itself as it does. Without paperwork, assume a service is due and allow for the cost. Parts for some older movements are scarce, so it is worth asking a watchmaker whether a particular calibre is easy to look after before you commit. Watch servicing explains what is involved.
Do not rely on a vintage watch being water resistant. Seals perish, cases wear and the rating on the dial described the watch when it was new. Keep it away from water unless it has been resealed and pressure tested.
Questions to ask a seller
- Is the dial original, or has it been refinished or replaced?
- Are the hands, crown and crystal original to the watch?
- Has the case been polished?
- When was it last serviced, by whom, and is there a receipt?
- How is it running: how many seconds a day does it gain or lose?
- Can I see clear photographs of the movement and the inside of the case back?
- What is your returns policy if it is not as described?
A good seller will answer all of these without fuss. Vague answers, a refusal to show the movement or pressure to decide quickly are reasons to walk away.
Sensible first purchases
Simple, time-only, hand-wound or automatic watches in steel from the 1950s to the 1970s are the traditional starting point. They were made in large numbers by Swiss, Japanese and British firms, they are straightforward to service and good examples can still be found at modest prices. Chronographs and other complicated watches cost more to buy and to maintain, so they are better left until you have some experience.
Next steps
- Watch movements explained, so you know what you are looking at when the case back comes off.
- How to spot a fake watch for the checks on counterfeits and mixed-parts watches.
- Watch servicing for what to expect after you buy.
- Buying at auction if you plan to bid, with the auction cost calculator to work out the real price.
- Back to the watch collecting guide.