Skip to main content

Watch movements explained: manual, automatic and quartz

The movement is the mechanism that makes a watch run. A manual movement is wound by hand, an automatic winds itself as you wear it, and a quartz movement runs from a battery. Quartz is the most accurate and the cheapest to keep, while mechanical watches need regular servicing and are what most collectors seek out.

The three types at a glance

Manual (hand-wound)Automatic (self-winding)Quartz
PowerMainspring, wound by the crownMainspring, wound by a rotor as you moveBattery
Timekeeping elementBalance wheel and hairspringBalance wheel and hairspringQuartz crystal
Typical accuracySeconds per daySeconds per daySeconds per month
Seconds handSmooth sweep in small stepsSmooth sweep in small stepsUsually one tick per second
UpkeepPeriodic full servicePeriodic full serviceBattery and seals

How a mechanical movement works

Every mechanical watch, manual or automatic, works on the same principle. Energy is stored in a coiled strip of metal called the mainspring, which sits in a drum called the barrel. As the spring unwinds it turns a series of gears, the gear train, which drives the hands.

Left alone, the spring would unwind in seconds. The escapement stops that. It releases the gear train one tooth at a time, and each release gives a small push to the balance wheel, which swings back and forth on a fine coiled hairspring. The steady swing of the balance is what keeps time, and the escapement is what you hear ticking.

The speed of the balance is called the beat rate. Common rates are 18,000, 21,600 and 28,800 vibrations per hour, which means the seconds hand moves five, six or eight times a second. That is why it appears to glide.

Manual movements

A manual watch is wound by turning the crown, usually once a day. When you feel firm resistance the spring is full, and you should stop. Most run for somewhere around a day and a half to two days on a full wind, and some modern designs run far longer.

Automatic movements

An automatic adds a weighted rotor that swings as your wrist moves and winds the mainspring through a set of gears. Worn daily, it keeps itself running. A slipping clutch on the mainspring means it cannot be overwound.

Take it off for longer than its power reserve and it will stop. That does no harm. Give the crown a few dozen turns if the movement allows hand winding, set the time and put it on. Some people use a winder to keep an automatic going, which is covered in watch storage, boxes and winders.

Quartz movements

In a quartz watch a battery sends current through a tiny quartz crystal, which vibrates at a very stable 32,768 times a second. A circuit counts the vibrations and sends one pulse a second to a small motor that moves the hands. With no balance wheel to be upset by position, temperature or knocks, even an inexpensive quartz watch is far more accurate than a fine mechanical one.

Quartz wristwatches went on sale at the end of the 1960s and within a decade had overturned the traditional watch industry, a period often called the quartz crisis.

Jewels

The jewels in a movement are bearings, not decoration. They are small synthetic rubies or sapphires set where steel pivots turn, because the hard, smooth stone reduces friction and wear. They have almost no value as gems.

A simple hand-wound movement is normally described as fully jewelled at 17 jewels. Automatics and watches with extra functions need more, commonly in the low to mid twenties. A higher count is not a sign of higher quality in itself.

Complications

A complication is any function beyond showing hours, minutes and seconds. The ones you will meet most often:

  • Date and day-date: the commonest complication of all.
  • Chronograph: a stopwatch, worked by pushers on the side of the case.
  • GMT or second time zone: an extra hand or disc showing the time somewhere else.
  • Power reserve indicator: shows how much wind is left.
  • Moon phase: a disc showing the phase of the moon.
  • Annual and perpetual calendars: calendars that allow for the different lengths of the months, and in the perpetual's case for leap years too.
  • Tourbillon: a rotating cage for the escapement, originally devised to even out the effect of gravity in pocket watches.
  • Minute repeater: chimes the time on demand.

More complications mean more parts, a higher price and a dearer service. A chronograph costs noticeably more to service than a time-only watch.

Tip: Do not change the date by the crown when the hands are near midnight. On many movements the date mechanism is engaged for a few hours either side, and forcing it can damage it. Move the hands to the lower half of the dial first.

Accuracy and what "chronometer" means

A healthy modern mechanical watch should stay within a few seconds to a few tens of seconds a day, depending on its grade. Vintage watches are often less precise, and a steady error matters less than an erratic one.

The word "chronometer" on a Swiss watch means the movement has been independently tested and certified, in most cases by the Swiss testing institute known as COSC, whose standard for mechanical movements is an average of minus four to plus six seconds a day. It is a statement about tested accuracy when new, not a guarantee of how an old watch runs today.

Next steps